Cute Framed Kitchen Mold with little Piglet - DIY Project Tutorial

 hostess gifts kitchen art

Ever since I discovered decoupage and the world of molds I have become hooked on trying out different crafting projects. I am going to visit my girlfriends very soon and thought why not bring them each a little crafted framed piglet that they can hang up in their kitchen. 

For this project you will need the molds listed below and a few other items for which I will list the links later on. 

material list for piglet frame

A little note about paper clay. I love paper clay, because it is very lightweight, dries fast and can be painted with various materials. I started the project with Activa La Doll Premier Natural air Dry Stone Clay which I absolutely love. For the 4th frame I run out and used DAS Clay and had a chance to compare. DAS clay took longer to dry and was heavier. The color was also a bit more grey and not white. It took the mold nicely, but so far I do prefer the Activa clay over DAS. But back to the tutorial.

Piglet mold

Sprinkle a bit of baking powder or even baby powder in the mold so that the mold comes out easy. Then take a bit of clay and fill the cavity of the mold. Press the clay in firmly so that all the crevices get filled.

cut clay

Use a ruler or other sharp blade and cut off the excess clay. Then turn the mold over and slowly let the cast drop out of the mold.You might have to help it along a bit, but the cast usually drops out fairly easy.

two piglets

If you need to do some touch up, you can take a bit of clay, wet a brush and gently brush on some more paper clay. I am going for a vintage look here and will not be touching up anything.

frame mold

If you have an old frame you can use it for the next step. If not I found it very convenient to have molds for frames on hand. Just make sure that your piggy has enough room in the center of the frame.

frame cast

This is what the a cast of a frame looks like. I found similar molds on Amazon just make sure to double check the size before ordering. I have ordered plenty of stuff not realizing that they were much smaller than what I thought them to be.

frame backing

Now it's time to make a backing for our frame. When using air dry clay some shrinkage can occur, so it's best to wait until the clay is dry. Then just trace a circle on cardboard and cut it to size. 

glue the frame

Apply a generous amount of glue on the backside of your frame and glue the cut out cardboard backing to the frame. Glue the piglet in the center of the frame.

soft gel

I apply a coat of Golden Soft Gel Medium over everything. It acts as a barrier to protect the cardboard from buckling when wet paint is applied and it also acts a bit as an adhesive to seal everything in. 

painting piglet molds

You can use any color Acrylic paint at this point. I started with a coat of white and then decided to go with an off white instead. Then I took a chocolate brown and made a wash (more water than paint) and applied it all over. I rubbed away some areas that I wanted to remain lighter and added more paint in areas where I wanted it to be darker. The painting process is a put on wipe off sort of thing. Don't be afraid to experiment - you can always paint over with a heavier coat of color. 

piglet face

 Here you can see how the darker brown paint has seeped into the crevices. This will only happen if you either use watery paint or a paste to wipe the color in. 

As I mentioned before I am going for an aged look and want to the piece to have a bit of patina. That's why the color application is not even. 

side view

Here is a side view of the piece showing the supposed age of the piece. 

piglet decorative frames

To finish the piece off add a ribbon and attach a small saw tooth picture hanger

 

 

 

The piglet mold can be ordered from my store - see below

Tilbage til blog
* “As an Amazon Associate, I earn from qualifying purchases.This page might contains affiliate links, therefore if you choose to purchase after clicking a link, I may receive a commission at no extra cost to you.” *

New in Store

Inspiring interior decor and gift items

1 af 25

Meet the Artist

"My Name is Enzie (NC) and I am a multi disciplinary artist based in southern California, USA.

I specialize in hand painted life-size pet portraits and custom-made miniature dioramas in various sizes.

Visit my blog to see what I am currently working on."

Enzie

Bio

Join me on Facebook

Be the 1st to see what is new and share your custom made portraits.

Click here